Evolution of lattice distortions in 4H-SiC wafers with varying doping

Abstract

Lattice distortions (LD) in 4H-silicon carbide (SiC) wafers were quantified using synchrotron X-ray rocking curve mapping (RCM), and were resolved into their two components of lattice strain (Δd/d) and lattice plane curvature (LPC) for 150 mm diameter wafers. The evolution of these LDs were investigated for three sequential substrates from the same boule, one of which was the substrate reference, and the other two had a 10 µm thick, 1 × 1017 and 4 × 1014 cm-3 n-type doped epitaxial layer. The lattice strain, Δd/d, was highest for the lowest doped wafer due to higher mismatch with the substrate wafer. After epitaxial layer growth, the LPC variation across the wafer increases by a factor of 2, irrespective of doping. The LPC maps indicate presence of a twist in the lattice planes that increases after epitaxial growth. The LPC component has higher influence on wafer shape change, which can reduce device yields. The lattice strain component predominantly affects the glide of basal plane dislocations (BPDs), thereby reducing device reliability. From analysis of peak widths, it was determined that threading dislocations in the top 6 microns of the wafer increase after epitaxial layer growth.