Abstract
Gas-atomized powders are frequently used in metal additive manufacturing (MAM) processes. During consolidation, certain properties and microstructural features of the feedstock can be retained. Such features include porosity, secondary phases, and oxides. Of particular importance to alloys such as Al 6061, secondary phases found in the feedstock powder can be directly related to those of the final consolidated form, especially for solid-state additive manufacturing. Al 6061 is a heat-treatable alloy that is commonly available in powder form. While heat treatments of 6061 have been widely studied in wrought form, little work has been performed to study the process in powders. This work investigates the evolution of the Fe-containing precipitates in gas-atomized Al 6061 powder through the use of scanning and transmission electron microscopy (SEM and TEM) and energy dispersive X-ray spectroscopy (EDS). The use of coupled EDS and thermodynamic modeling suggests that the as-atomized powders contain Al13Fe4 at the microstructure boundaries in addition to Mg2Si. After one hour of thermal treatment at 530 °C, it appears that the dissolution of Mg2Si and Al13Fe4 occurs concurrently with the formation of Al15Si2M4, as suggested by thermodynamic models.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
