Abstract
Considering the high construction cost of horizontal adjacent well monitoring and the lack of vertical adjacent well fiber optic for obtaining fracturing information, this paper proposes the use of deviated wells with fiber optics for monitoring purposes. To demonstrate the advantages of deviated well fiber optics and the feasibility of their deployment, this paper constructs a forward model based on the finite element coupled with cohesive element approach to simulate the strain induced by the propagation of a single hydraulic fracture in horizontal wells on deviated well fiber optics, and conducts a numerical simulation analysis of the strain induced by the propagation of a single hydraulic fracture on deviated well fiber optics. The results show that the strain evolution induced by single-fracture propagation in deviated well fiber optics can be divided into four stages: strain-enhancing, strain-converging, tensile strain-expanding, and linear strain-converging. The strain evolution characteristics of deviated well fiber optics are manifested as follows: a “heart-shaped” tensile strain convergence zone with a certain deviation appears in the middle, which subsequently converges into a tensile strain convergence band, with compressive strain convergence zones on both sides, and an expanding tensile strain convergence zone on the outer side of the compressive strain convergence band. The analysis finds that when the well inclination angle is greater than 45°, the strain response characteristics of deviated well fiber optics are mainly governed by the width expansion of the fracture, and when less than 45°, they are mainly governed by the height expansion of the fracture. Changes in the azimuth angle can cause a deviation of the “heart-shaped” tensile strain area and the compressive strain convergence zone in the fiber-optic strain waterfall plot, with larger deviations corresponding to smaller azimuth angles. The depth at which the deviated well fiber optics are deployed, reaching the depth of the horizontal section of the horizontal well, can reflect the upward expansion of the fracture height. The results of the analysis illustrate the advantages of deviated well fiber optics in obtaining both fracture width and height expansion information simultaneously and propose a method for selecting suitable deviated well fiber-optic construction parameters based on fracturing monitoring needs. This research can reduce the construction cost of deploying fiber optics in adjacent wells and has significant implications for guiding the layout of adjacent well fiber optics.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.