Abstract

Electrochemical functionalization of treated epitaxial graphene samples on Si-face 6H-SiC are presented in this work. Three semi-insulating 6H-SiC substrates cut from different boules with varying off cut angle (on axis, 0.5° and 1.0° degrees off axis in the [112‾0] direction) were diced into 10mm x 10mm samples and quality EG grown on top. A home-build electrochemical cell was used with current applied though a 10% H2SO4 solution, with a Pt wire and exposed graphene as the anode and cathode respectively. Functionalization was determined using Raman spectroscopy and measured by an increase in D/G ratio, increase in fluorescence background and introduction of C-H bond peak at ~2930 cm-1. Components of the Raman spectra before and after functionalization of all samples used were analyzed to show a substrate dependent effect on functionalization with values such as D/G ratio and normalized fluorescence slope varying between the substrates.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call