Abstract

Evidence of boron diffusion into the MgO barrier of a CoFeB/MgO based magnetic tunnel junction has been identified using analytical scanning transmission electron microscopy (STEM) and X-ray photoelectron spectroscopy. Structures were deposited by DC/RF-magnetron sputtering, where defective, sub-stoichiometric MgO barriers degrading device performance have been previously mitigated against by deposition of thin Mg layers prior to MgO deposition. We show that despite the protection offered by the Mg layer, disorder in the MgO barrier is still evident by STEM analysis and is a consequence of the oxidation of the Co40Fe40B20 surface during MgO deposition. Evidence of boron diffusion from CoFeB into the MgO barrier in the as-deposited and annealed structure is also presented, which in the as-deposited case we suggest results from the defective structures at the barrier interfaces. Annealing at 375 °C results in the presence of B in the trigonal coordination of [BO3]3− in the MgO barrier and partial crystallization of the top electrode (we presume there is also some boron diffusion into the Ta capping layer). The bottom electrode, however, fails to crystallize and much of the boron is retained in this thicker electrode. A higher annealing temperature or lower initial boron content is required to crystallize the bottom electrode.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call