Abstract

Abstract. Antarctic surface snow has been studied by means of continuous measurements and observations over a period of 3 yr at Dome C. Snow observations include solid deposits in form of precipitation, diamond dust, or hoar, snow temperatures at several depths, records of deposition and erosion on the surface, and snow profiles. Together with meteorological data from automatic weather stations, this forms a unique dataset of snow conditions on the Antarctic Plateau. Large differences in snow amounts and density exist between solid deposits measured 1 m above the surface and deposition at the surface. We used the snow-cover model SNOWPACK to simulate the snow-cover evolution for different deposition parameterizations. The main adaptation of the model described here is a new event-driven deposition scheme. The scheme assumes that snow is added to the snow cover permanently only during periods of strong winds. This assumption followed from the comparison between observations of solid deposits and daily records of changes in snow height: solid deposits could be observed on tables 1 m above the surface on 94 out of 235 days (40%) while deposition at the surface occurred on 59 days (25%) during the same period, but both happened concurrently on 33 days (14%) only. This confirms that precipitation is not necessarily the driving force behind non-temporary snow height changes. A comparison of simulated snow height to stake farm measurements over 3 yr showed that we underestimate the total accumulation by at least 33%, when the total snow deposition is constrained by the measurements of solid deposits on tables 1 m above the surface. During shorter time periods, however, we may miss over 50% of the deposited mass. This suggests that the solid deposits measured above the surface and used to drive the model, even though comparable to ECMWF forecasts in its total magnitude, should be seen as a lower boundary. As a result of the new deposition mechanism, we found a good agreement between model results and measurements of snow temperatures and recorded snow profiles. In spite of the underestimated deposition, the results thus suggest that we can obtain quite realistic simulations of the Antarctic snow cover by the introduction of event-driven snow deposition.

Highlights

  • The upper meter of the snow cover on the Antarctic Plateau is exposed to extreme conditions that influence the development of the snow cover

  • We first discuss the results of the experiment where deposition on the surface is compared to measurements of solid deposits above the surface, as this is the basis for our event-driven model approach

  • We validate the model by comparing modelled snow height changes to stake measurements, modelled to measured snow temperatures, and the modelled stratigraphy to snow profiles

Read more

Summary

Introduction

The upper meter of the snow cover on the Antarctic Plateau is exposed to extreme conditions that influence the development of the snow cover. These authors report nearly constant density values from Dome F (3800 m a.s.l.) to Kohnen (2890 m a.s.l.), ranging from 333 to 375 kg m−3 and averaging to 351 kg m−3 These observations describe the snow cover at a given time and do not give us information on the evolution of the Antarctic surface snow. Gauge measurements are problematic since drifting snow is blown into the gauges (Bromwich, 1988) and the snowfall amounts in this region do not exceed the minimum gauge resolution (Cullather et al, 1998) Combination of these facts decreases the accuracy of precipitation measurements and the estimations of the surface mass balance. We will only describe measurements of interest to our study, covering the period from January 2005 through July 2009

Meteorological records
Snow temperatures
Snow profiles
Event-driven snow deposition
Surface compaction by wind
Snow settlement
Snow albedo
Initial and boundary conditions
Results and discussion
Stakes
Settlement of the underlying snow cover
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call