Evaporation of anhydrous ammonia from small concrete coupons and implications regarding evaporation from a large accidental spill on concrete

Abstract

AbstractAnhydrous ammonia is transported via ship, rail, and road everyday in the United States as a refrigerated liquid at ambient pressure. As a result, unintential release of a large amount of anhydrous ammonia could result from an accident during transportation. The aim of this paper is to provide a better understanding of the evaporation of anhydrous ammonia from porous media. In our investigation, laboratory‐scale concrete coupons were used as a surrogate for a larger concrete pad that could be present in an event involving an unintentional release of liquid anhydrous ammonia. Concrete coupons sized 5 cm × 5 cm × 1.9 cm were saturated in liquid anhydrous ammonia, and measurements of the subsequent evaporation from the coupons were made in an environmental chamber. The ambient air temperature within the chamber varied from 5 to 45°C, and the relative humidity varied from 5% to 75%. Mass‐difference calculation and Berthelot's reaction were used to determine the average evaporation rate from a concrete coupon across all trials, which was found to be 6.5 ± 1.9 mg/s. To validate these evaporation rates, the remaining ammonia in the concrete coupon was measured for each trial. We found that the time‐integrated calculated evaporation rates correlated well with the total mass of ammonia that was lost from the coupons. In addition, it was found that ambient air temperature and relative humidity had little influence on anhydrous ammonia evaporation from the concrete coupons.