Abstract
A high infrared emissivity coating with porosity of 16.2 % was deposited on Ni-based alloy by saucer-shaped porous feedstocks using the atmospheric plasma spraying technique. The solid-phase reaction method was employed to synthesize Ca2+-doped YbCrO3 ceramic powders, and then the saucer-shaped porous feedstocks were obtained by electrostatic spraying accompanied by heat treatment, and the conventional spray drying feedstocks were used as comparison. Compared with the conventional structural coating, the coating achieved by saucer-shaped feedstocks shows higher porosity and surface roughness due to the insufficient melting of the feedstocks with larger diameters in the plasma flame. Therefore, the coating achieved by saucer-shaped feedstocks exhibits a bimodal organization similar to that of nanostructured thermal barrier coatings. Compared with the conventional coating, the coating with new structure shows a higher emissivity value of 0.9460 at 1–14 µm waveband at room temperature due to the higher surface roughness (7.12 μm). Moreover, the average emissivity of coatings with roughness ranging from 0.93 µm to 7.12 µm is all above 0.91. More importantly, although the infrared emissivity of all coatings with different roughness decreases with the increase of temperature, they still remain above 0.77 at 1–14 µm when the temperature reaches 1200 °C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
