Abstract

Wood waste generated during the tree felling and processing is a rich, green, and renewable lignocellulosic biomass. However, an effective method to apply wood waste in anaerobic digestion is lacking. The high carbon to nitrogen (C/N) ratio and rich lignin content of wood waste are the major limiting factors for high biogas production. NaOH pre-treatment for lignocellulosic biomass is a promising approach to weaken the adverse effect of complex crystalline cellulosic structure on biogas production in anaerobic digestion, and the synergistic integration of lignocellulosic biomass with low C/N ratio biomass in anaerobic digestion is a logical option to balance the excessive C/N ratio. Here, we assessed the improvement of methane production of wood waste in anaerobic digestion by NaOH pretreatment, co-digestion technique, and their combination. The results showed that the methane yield of the single digestion of wood waste was increased by 38.5% after NaOH pretreatment compared with the untreated wood waste. The methane production of the co-digestion of wood waste and pig manure was higher than that of the single digestion of wood waste and had nonsignificant difference with the single-digestion of pig manure. The methane yield of the co-digestion of wood waste pretreated with NaOH and pig manure was increased by 75.8% than that of the untreated wood waste. The findings indicated that wood waste as a sustainable biomass source has considerable potential to achieve high biogas production in anaerobic digestion.

Highlights

  • Wood is a natural, renewable, and recyclable green material and bioenergy source

  • pig manure (PM) was 309.06 mL CH4 /g VS, which was increased by 75.8% compared with that of the single-digestion of wood waste (WW) (Figure 4c) and was remarkably (p < 0.05) higher than that of the single-digestion of WW

  • Increased from 175.81 mL CH4 /g VS to 243.53 mL CH4 /g VS, which was equivalent to a 38.5% increase compared with that of untreated WW

Read more

Summary

Introduction

Renewable, and recyclable green material and bioenergy source. Under the circumstance of increasing depletion of non-renewable energy and material, getting the utmost out of wood is increasingly important. Almost 50% of a tree can converted to the final products, and the rest remain as wood waste (WW) [1]. WW mainly consist of the residues from tree felling and processing, as well as discarded furniture and building materials [2]. Among these processes, sawmills account for 40–60% of the total WW generation [3,4]. The main treating options for WW are incineration for heating, thermal power

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call