Abstract

There are abundant granite reserves in China, but the adhesion between granite and asphalt is poor, and there are problems such as insufficient water stability, which seriously restrict the application and promotion of granite in asphalt pavement. In order to improve the adhesion between granite and asphalt, as well as the water stability of asphalt mixture, amines and polymers were selected as anti-stripping agents. First, silane coupling agent modified asphalt (SCAMA), rock asphalt modified asphalt (RMA), SBS modified asphalt (SBS), and double rock composite modified asphalt (SCA&RMA) were produced; the modification effect of different anti-stripping modified asphalts was evaluated. Then, the adhesion of different types of asphalts and granite aggregates before and after aging was evaluated by time-delayed water immersion method. Finally, AC-10 and AC-16 granite–asphalt mixtures were designed, through indoor performance test and 1/3 scale accelerated loading test, evaluating the improvement effect of granite–asphalt mixture on pavement performance. The results show that the asphalt modified by amine or organic polymers anti-stripping agent could significantly improve the adhesion between granite and asphalt. The Hamburg wheel-tracking test failed to fully reflect the whole process of high-temperature rutting failure. When evaluating the high-temperature performance and water stability of asphalt mixtures, it is recommended that the evaluation method should cover the whole failure stage of asphalt mixtures; considering the coupling effect of water and high temperature, the order of water stability of granite–asphalt mixture is proposed as follows: SCA&RMA > RMA > SBS > SCAMA > 70-A, and SCA&RMA has the best modification effect.

Highlights

  • China is rich in granite reserves; the adhesion between granite and asphalt is poor, and there are some problems such as insufficient water stability, which seriously restricts the application and popularization of granite in asphalt pavement

  • Qilu70-A asphalt was chosen as base asphalt, and Binhua SBS, Qingchuan rock asphalt, Silane coupling agent (KH-550), and composite agents were taken as anti-stripping measures

  • Qingchuan rock asphalt was added to the 70-A base asphalt, pre-heated at 145 ◦C

Read more

Summary

Introduction

China is rich in granite reserves; the adhesion between granite and asphalt is poor, and there are some problems such as insufficient water stability, which seriously restricts the application and popularization of granite in asphalt pavement. The granite belongs to acidic aggregate, so its adhesion to asphalt is very poor. It is difficult to ensure its water stability and durability when paving asphalt pavement as mix aggregate. The granite–asphalt pavement paved by conventional methods has the problems of asphalt film stripping aggregate, particle falling, looseness, and other water damage. The durability of its conventional anti-stripping measures is very poor, which greatly shortens the maintenance cycle of asphalt pavement, increases the maintenance cost, and seriously affects the operation quality of highway [1,2]. In order to solve this problem, most companies modified the granite–asphalt mixture or structural parameters by optimizing the pavement structure and material design [3,4]

Methods
Results
Discussion
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.