Evaluation on energy performance in a low temperature district heating system integrated with organic Rankine cycle

Abstract

Combined heat and power (CHP) coal-fired plants and heat-only boilers are still working as main heat sources in North China. These provide high temperature water on the primary side of district heating (DH) systems. There can be large temperature differences between the primary side and secondary side deployed in low temperature district heating (LTDH) of buildings. In this paper, a LTDH system, integrated with an organic Rankine cycle (ORC) system, is presented and evaluated on how to utilize the limited temperature difference between the primary and secondary sides in a substation. Two cases are illustrated of the performance of two modes (series or parallel connection) and energy efficiencies of the configurations with or without an ORC system. The results showed that the integrated ORC system could provide sufficient power for the circulating pumps in the DH system. The integration of the ORC leads to only a very slight decrement on the supply water temperature. Generally, the series mode can generate the maximum output power from an integrated ORC system. The parallel mode showed more flexibility on the adjustment of output power from the ORC system, especially where domestic hot water is needed. When the cold tap water was used as a cooling stream in the condenser of an ORC system before preparing to be the domestic hot water, it is very helpful in improving the performance of the ORC and increasing the energy efficiency of the DH system.