Evaluation of Welded Lap Joints Using Ultrasonic Guided Waves.

Abstract

Welded lap joints play a vital role in a wide range of engineering structures such as pipelines, storage tanks, pressure vessels, and ship hulls. This study aims to investigate the propagation of ultrasonic guided waves in steel welded lap joints for the baseline-free inspection of joint defects using the mode conversion of Lamb waves. The finite element method was used to simulate a single lap joint with common defects such as corrosion and disbonding. To identify the propagating wave modes, a wavenumber-frequency analysis was conducted using the 2D fast Fourier transform. The power loss of the transmitted modes was also determined to identify damage in the lap joints. The results indicate that the A0 incident in pristine conditions experienced significant transmission losses of about 9.5 dB compared to an attenuation of 2.8 dB for the S0 incident. The presence of corrosion was found to reduce these transmission losses by more than 28%. In contrast, introducing disbonding in the lap joint increased the transmission loss of the S0 incident, while a negligible loss was observed for the A0 incident. The mode-converted S0 (MC-S) and mode-converted A0 (MC-A0) incidents were found to exhibit a unique sensitivity to the presence of corrosion and disbonding. The results indicate that MC-S0 and MC-A0 as well as Lamb mode incidents interact differently in terms of corrosion and disbonding, providing a means to identify damage without relying on baseline signals.