Evaluation of Two-Voltage and Three-Voltage Linear Methods for Deriving Ion Recombination Correction Factors in Proton FLASH Irradiation

Abstract

Ultrahigh dose-rate (FLASH) proton therapy is of great interest due to potential reduced normal tissue toxicities without compromising tumor-killing effect compared to current clinical proton practices. However, the ionization chamber response to proton beams under ultrahigh dose rates (&#x003E;40 Gy/s) has not been thoroughly investigated. In this study, four different ion chambers (PTW 34045 Advanced Markus, PPC-40, CC-04, and CC-13 from IBA Dosimetry) were irradiated with 230 MeV proton beams at 1.5, 63.7, and 127.6 Gy/s dose rates. Theoretical values of ion recombination correction factor (<inline-formula> <tex-math notation="LaTeX">${k}_{s}$ </tex-math></inline-formula>) were calculated from saturation curves using Niatel&#x2019;s model. The theoretical <inline-formula> <tex-math notation="LaTeX">${k}_{s}$ </tex-math></inline-formula> values were compared to the values using the two-voltage (2V) method from standard dosimetry protocols and the three-voltage linear (3VL) method proposed by Rossomme <i>et al.</i> Both parallel plate chambers and CC-04 demonstrated adequate ion collection efficiency at the highest dose rate. For these three chambers, there is no statistically significant difference between theoretical <inline-formula> <tex-math notation="LaTeX">${k}_{s}$ </tex-math></inline-formula> values and those calculated with 2V and 3VL methods. However, significant ion recombination correction was found in CC-13 (<inline-formula> <tex-math notation="LaTeX">${k}_{s}&gt;1.50$ </tex-math></inline-formula>) when dose rate reached 63.7 Gy/s. The assumption of insignificant initial recombination in standard dosimetry protocols also underestimated the ion recombination effect in this scenario.