Abstract
The surface quality of the ground components mainly depends on the surface condition of the grinding wheel. The surface condition of the grinding wheel changes with grinding time due to wheel wear and loading. The excessive wear and loading increases the cutting force and the temperature. This in turn affects the quality of the produced component. Hence periodic monitoring of the grinding wheel surface is essential to avoid the production of the defective components. In this paper, an attempt is made to study the changes in the grinding wheel surface condition using the laser scattered images. The simple speckle imaging arrangement is fabricated and fitted into the grinding machine to capture the images of the grinding wheel after each 100 passes. The fresh wheel expected to scatter more light due to higher roughness and porosity. On the other hand, the completely glazed and worn-out wheel scatters the light less due to smoother surface. Thus, speckle image intensity distribution captures the changes in the grinding wheel surface condition. The optical parameters evaluated from the speckle images clearly indicating the changes in the grinding wheel condition. This method can be utilized to evaluate the grinding wheel condition to improve the surface quality of the component produced.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.