Abstract
The high dose and dose-per-pulse rates (up to 130 mGy/pulse) produced by some intraoperative radiation therapy (IORT) accelerators pose specific dosimetric problems due to the high density of electric charge per pulse produced in the ionization chamber cavity. In particular, the correction factor for ion recombination, ks, calculated with the traditional two-voltage method is significantly overestimated and three alternative models have been proposed in the literature allowing for the presence of a free-electron component. However, at present there is no general consensus on the best model to assess the ion recombination correction and controversy remains on the uncertainty associated with ks.In the present work we adopted a Monte Carlo (MC) approach to assess the uncertainty associated with the ion recombination correction in plane-parallel chambers used in high dose-per-pulse electron beam dosimetry. The uncertainty associated with ks was calculated for the following plane-parallel ionization chambers: Scanditronix/Wellhofer Parallel Plate Chamber PPC05 and PPC40, PTW Advanced Markus Model 34 045 and PTW Roos Model 34 001. Input variables for MC calculations were derived from experimental data at 28 and 73 mGy/pulse.Taken together, the results of this study indicate that ks values calculated according to the three ion recombination models do not overlap within their standard uncertainties, suggesting that an additional type-B uncertainty component would be necessary to take into account possible differences between the models. Our results indicate that the combined relative standard uncertainty in ks should be calculated as the sum in quadrature of a (type-A) MC-based uncertainty component and a (type-B) uncertainty contribution evaluated assuming a uniform distribution between ks values obtained from the two extreme models.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.