Evaluation of the Textural Parameters of Zeolite Beta in LDPE Catalytic Degradation: Thermogravimetric Analysis Coupled with FTIR Operando Studies

Dorota Majda,Kinga Góra-Marek,Ewa Janiszewska,Karolina A Tarach,Kamila Pyra

doi:10.3390/molecules25040926

Abstract

Zeolite-based catalysts are globally employed in many industrial processes, such as crude-oil refining and bulk chemical production. In this work, the cracking of low-density polyethylene (LDPE) was thoroughly followed in a FTIR operando study to examine the catalytic efficiency of purely microporous zeolites β of various textural characteristics. To provide complementary and valuable information on the catalytic activity of the zeolite β studied, the thermogravimetric analysis results were compared with yields of the products generated under operating conditions. The reaction products were analyzed via GC–MS to determine the hydrocarbon chain distribution in terms of paraffin, olefins, and aromatics. The individual impact of textural and acidic parameters on catalytic parameters was assessed. The accumulation of bridging hydroxyls of high strength in the zeolite β benefited the decrease in polymer decomposition temperature. Through a strategic comparison of purely microporous zeolites, we showed that the catalytic cracking of LDPE is dominated by the acidic feature inherent to the microporous environment.

Highlights

The acidic characteristics of zeolite β originate from its broad range of Si/Al ratios and its particular structure disordered in one dimension, as a result of polymorph intergrowth [1,2,3,4].The three-dimensional interconnected channel system built up from 12 rings classifies zeolite β as a large-pore three-dimensional (3D) zeolite
Aguado et al [13] examined products gained from catalytic cracking of low- and high-density polyethylene (LDPE and HDPE) and polypropylene (PP) over zeolites β synthesized via various methods, evidencing good selectivity toward C5 –C12 hydrocarbons
Through a strategic comparison of zeolites β with tuned microporous characteristics, we showed that the catalytic cracking of low-density polyethylene (LDPE) over 12-ring zeolite β is ruled by the acidic feature

Summary

Introduction

The acidic characteristics of zeolite β originate from its broad range of Si/Al ratios and its particular structure disordered in one dimension, as a result of polymorph intergrowth [1,2,3,4].The three-dimensional interconnected channel system built up from 12 rings classifies zeolite β as a large-pore three-dimensional (3D) zeolite. Zeolite β is widely reported as a solid acid catalyst, addressed to cracking [5,6,7], (hydro)isomerization of alkanes [8,9], and alkylation of aromatics [10,11,12]. Aguado et al [13] examined products gained from catalytic cracking of low- and high-density polyethylene (LDPE and HDPE) and polypropylene (PP) over zeolites β synthesized via various methods, evidencing good selectivity toward C5 –C12 hydrocarbons. Using zeolites Hβ, HZSM-5, and USY for the catalytic degradation of HDPE showed that the product distribution depends on the zeolite structure. They indicated the high selectivity of catalyst β to the C5 –C12 alkanes

Objectives

Methods

Results

Conclusion