Evaluation of the Modal Parameters of a Unidirectional Carbon-Based Composite Structure Using the Influential Factor of Static Loading.

Abstract

Static loading can significantly alter the dynamics of unidirectional carbon-based composites (UCBCs), with modal parameters varying depending on the orientation of the carbon fibers. In this study, the sensitivity of modal parameters of UCBC structures under uniaxial static loading was investigated. The theoretical static load influential factor was derived from a linearized UCBC model and corresponded to the transformed decoupled response over the mass-normalized static load. Three rectangular UCBC specimens (carbon fiber orientation of 0°, 45°, and 90°) were prepared under fixed-fixed boundary conditions using a jig fixture. Uniaxial static loads between 0 N and 1000 N were applied, and the first three modes of the UCBC specimens were analyzed. An isotropic SUS304 specimen was used as a reference. The linearization assumption about the UCBC structure was preliminarily validated with the Modal Assurance Criterion (MAC). A high influential factor was found for the UCBC specimen when carbon fibers were aligned with the static load direction at the first two resonance frequencies. Therefore, the proposed influential factor is an efficient indicator for determining the sensitivity of the dynamic response of a UCBC structure over a static load case. The variations in the influential factors for the UCBC specimens were more pronounced than for the isotropic specimens.