Abstract
Cement emulsified asphalt mortar (CEAM) is a key component of ballastless rail track systems which is tasked with damping the train movement energy and transferring loads to the concrete roadbed. This mortar consists of asphalt emulsion, sand, cement, and water and enjoys better toughness and flexibility properties than cement mortar thanks to the combined effect of cement and asphalt emulsion. One of the primary causes of failure in this mortar is cracking at low temperatures. This study investigated the fracture toughness of CEAM (CRTS- II) with different volume percentages of mortar constituents, namely cement, sand, water, and asphalt emulsion, at low temperature in the linear elastic fracture mechanics (LEFM) framework. The critical stress intensity factors of the mortar for pure tensile (mode I), pure shear (mode II), and mixed tensile-shear (mixed mode I/II) fractures with Me values of respectively 1.0, 0, and 0. 67 were obtained. Considering the necessity of examining the effect of mix design ratios and their interactions and the need to limit these ratios to ensure acceptable rheological and mechanical properties, the experiments were designed using the D-Optimal mixture design method at 5% significance level. By assuming a quadratic model between the critical stress intensity factors of each fracture mode and the volume percentages of mortar constituents, a total of 20 randomized mix designs were obtained. For each mix design, the semi-circular bending (SCB) test was performed with at least 3 replications. The regression models based on the experimental results were developed. The findings demonstrated the dependence of mode I, mode II, and mixed mode I/II critical stress intensity factors on the mix design ratios. The lowest and highest fracture toughness estimates were related to the mixed tensile-shear and pure shear modes, respectively. Finally, the mixture design method was used to delimit the optimum mix design region for maximizing the fracture toughness of all three modes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.