Evaluation of the Machinability of Nickel-Base, Inconel 718, Alloy with Nano-Ceramic Cutting Tools

Abstract

The machinability of difficult-to-cut aerospace alloys can be enhanced by the rapid development of cutting tool materials that can withstand machining at high-speed conditions. The performance of nano-grain size ceramic tool materials were evaluated when machining nickel base, Inconel 718, in terms of tool life, tool failure modes and wear mechanisms as well as component forces generated under different roughing conditions. Comparison tests were carried out with commercially available ceramic tool materials of micron-grain composition. The test results show that the micron grain size commercially available tool materials generally gave the longest tool life. The dominant failure mode is nose wear, while some of the nano-ceramic tools were rejected mainly due to chipping at the cutting edge. This suggests that physical properties and mechanical stability of the cutting edge of the ceramic tools influence their overall performance. It is also evident that chemical compositions of the tool materials played a significant role in their failure. The alumina base ceramics are more susceptible to premature fracture than the silicon nitride base ceramics with higher fracture toughness. Presented as a Society of Tribologists and Lubrication Engineers Paper at the ASME/STLE Tribology Conference in Cancun, Mexico October 27–30, 2002