Abstract
Rotary-vacuum-filter mud (RVFM) is waste generated during the manufacturing process of titanium dioxide. In this work, RVFM and ceramic bricks containing different ratios of this waste are investigated. The mud samples were characterized using thermal analysis (TG/DTG). The aim of the present work was to determine the effect of adding RVFM on the ceramic properties of clay, such as apparent porosity, water absorption, linear shrinkage and flexural strength, used to produce red ceramics (bricks and roofing tiles). Samples were dried out at 110°C and fired at 800°C, 950°C and 1100°C. The addition of RVFM tends to increase the apparent porosity and water absorption and to decrease the flexural strength of the ceramic specimens. Based on the results, ceramic specimens with 20% RVFM content that are burned at 800oC can not be used as bricks, and ceramic specimens with 20% RVFM content that are fired at 800oC and 950°C can not used as roofing tiles, according to Brazilian standards.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
