Abstract

The purpose of this study is to investigate the effects of the freezing–thawing process on soils using elastic waves and electrical resistivity. Sand–silt mixtures with different silt fractions of 0%, 10%, 20%, 30%, 40%, 60%, 80%, and 100% weight at a fixed degree of saturation of 40% are placed in a nylon freezing cell. The temperature of the sand–silt mixtures decreases from 20°C to −13.5°C during freezing and increases from −13.5°C to 20°C during thawing. Bender elements and piezo disk elements are used to continuously measure shear and compressional waves, respectively, during freezing and thawing. Four circular electrodes made of stainless steel are used to measure electrical resistivity. For the temperature measurement, a thermocouple is inserted into the specimen. The shear and compressional wave velocities as well as electrical resistivity dramatically change near 0°C during freezing and thawing for all sand–silt mixtures. After one cycle of freezing–thawing, the elastic wave velocities decrease and the electrical resistivity increases due to the fabric change of the specimens. During the thawing process, the electrical resistivity displays hysteresis behaviors (not elastic wave velocities) from −3°C to 0°C. This study demonstrates that elastic waves and electrical resistivity may effectively capture the property changes of the sand–silt mixtures during freezing–thawing.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.