Abstract
Porcelain sectional veneers with no preparation (no-prep) are an ultra-conservative choice for the esthetic treatment of the anterior teeth. They can be made from a sintered feldspathic porcelain, which gives a great appearance with small thickness, but there are still concerns about the fracture strength of this material. The aim of this study was to evaluate the fracture strength of porcelain sectional veneers made from 2 different sintered feldspathic porcelains. Twenty recently extracted human incisors were randomly divided into 2 groups according to the porcelain material (n = 10). The 1st group was applied the IPS Style® Ceram feldspathic porcelain and the 2nd group - GC InitialTM MC. The porcelain sectional veneers were fabricated following the manufacturers' instructions. After the veneers bonded with resin cement (Variolink® N), the fracture strength was measured using a universal testing machine (Instron®1195) at 1 mm/min until failure occurred. Failure modes were determined under a stereomicroscope. The mean fracture strength for group IPS Style Ceram was higher than that for group GC Initial MC (182.7 N and 155.7 N, respectively). The lowest value was observed in group IPS Style Ceram (78 N) and the highest value - also in the group IPS Style Ceram (294 N). Student's t-test demonstrated no statistically significant differences between the 2 groups (p > 0.05). There was no difference in the fracture strength of the porcelain sectional veneers for the 2 types of sintered porcelain used in this study. Cohesive failure within the porcelain sectional veneer was the most common mode of failure.
Highlights
Demands for esthetic and conservative treatment are increasing nowadays, especially with regard to the anterior region for malpositioned teeth and diastema.[1,2] Progress in adhesive technologies has led to a variety of more conservative restoration techniques
Porcelain sectional veneers with no preparation are an ultra-conservative choice for the esthetic treatment of the anterior teeth. They can be made from a sintered feldspathic porcelain, which gives a great appearance with small thickness, but there are still concerns about the fracture strength of this material
There was no difference in the fracture strength of the porcelain sectional veneers for the 2 types of sintered porcelain used in this study
Summary
Demands for esthetic and conservative treatment are increasing nowadays, especially with regard to the anterior region for malpositioned teeth and diastema.[1,2] Progress in adhesive technologies has led to a variety of more conservative restoration techniques. Ultra-thin veneers with minimal or no preparation (no-prep),3–7and recently porcelain sectional veneers, which are ultra-thin pieces that partially cover the teeth, and can be etched and adhered to the enamel to restore only the defected area while being ultra-conservative. Composite resin can be used to restore the defects in the anterior teeth It has the advantage of direct placement at 1 appointment. Porcelain sectional veneers with no preparation (no-prep) are an ultra-conservative choice for the esthetic treatment of the anterior teeth. They can be made from a sintered feldspathic porcelain, which gives a great appearance with small thickness, but there are still concerns about the fracture strength of this material
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.