Evaluation of the determination of hydrogen sulfide in the air of workplace by the detection tube method

Abstract

Objective: To evaluate the accuracy and applicability of detection tube method for quantitative detection of hydrogen sulfide in workplace air. Methods: In September 2021, the lower limit of quantification, accuracy, precision, environmental factors, interfering gases and other performance indicators of the method for determining hydrogen sulfide in the air of workplace were verified by the detection tube, and the results were compared with those of GB 11742-89 "Standard method for hygienic examination of hydrogen sulfide in air of residential areas-methylene blue spectrophotometric method" to evaluate the application effect of the detection tube method for quantitative detection of hydrogen sulfide in workplace air. Results: There was no significant difference in the results of 2.83 mg/m(3), 4.25 mg/m(3) and 17.00 mg/m(3) hydrogen sulfide concentration between the two methods (P>0.05) , but there was significant difference in the results of 8.50 mg/m(3) concentration (P<0.05) . The lower limit of quantification of hydrogen sulfide in workplace air was 2.83 mg/m(3), the accuracy was 96.0%-111.0%, and the precision was 0.70%-6.64%. Under the condition of 4 ℃, the measured results decreased by 3.39%-13.10%. When the humidity was 50%-80%, the relative error of the average measured value was -1.67%-4.44%. Interference gases that may exist in the workplace (including carbon dioxide, carbon monoxide, mercaptans, nitrogen oxides, sulfur dioxide, etc.) did not interfere with the results of the test tube. Conclusion: The accuracy and precision of the detection tube method meet the detection requirements. The method is simple, rapid and easy to be popularized, and can be used for the rapid detection of hydrogen sulfide gas concentration in the workplace.