Evaluation of the bioremoval of Cr(VI) and TOC in biofilters under continuous operation using response surface methodology

Abstract

In the present study, the bioremoval of Cr(VI) and the removal of total organic carbon (TOC) were achieved with a system composed by an anaerobic filter and a submerged biofilter with intermittent aeration using a mixed culture of microorganisms originating from contaminated sludge. In the aforementioned biofilters, the concentrations of chromium, carbon, and nitrogen were optimized according to response surface methodology. The initial concentration of Cr(VI) was 137.35mgl(-1), and a bioremoval of 85.23% was attained. The optimal conditions for the removal of TOC were 4 to 8gl(-1) of sodium acetate,>0.8gl(-1) of ammonium chloride and 60 to 100mgl(-1) of Cr(VI). The results revealed that ammonium chloride had the strongest effect on the TOC removal, and 120mgl(-1) of Cr(VI) could be removed after 156h of operation. Moreover, 100% of the Cr(VI) and the total chromium content of the aerobic reactor output were removed, and TOC removals of 80 and 87% were attained after operating the anaerobic and aerobic reactors for 130 and 142h, respectively. The concentrations of cells in both reactors remained nearly constant over time. The residence time distribution was obtained to evaluate the flow through the bioreactors.