Evaluation of the basic friction angle in dry and conditioned fluids by tilt tests

Abstract

The basic friction angle is a basic parameter used in the shear strength estimation of discontinuities. The accurate determination of the shear strength of the discontinuities is of great importance for engineering structures built on or inside the rock.In this study; the variation of the basic friction angle tests under dry and different fluid conditions were carried out. For this purpose, a tilt device was designed. 7 different types of travertine samples with dimensions of 10×10×2 cm were used in the experiments. Tilt tests; to determine the change of the basic friction angle under different liquid conditions, dry, pH2, pH7 and pH12 were carried out under different test fluid conditions. Basic friction angles were measured 5 times in each group experiment. Initial basic friction angles were high regardless of sample type and experimental conditions. But; as the measurements continued, significant changes were observed about slip angles. The lowest basic friction angle was obtained in samples conditioned with pH2 while the highest angle was obtained in samples with ph7 conditioned. Thus, the effect of different water contents on sliding surfaces was determined experimentally. It is thought that this study can contribute to the existing studies on the basic friction angle with the tilt test.