Evaluation of surface roughness and wettability of heat-treated, fast-growing tropical wood species sengon (Paraserianthes falcataria (L.) I.C.Nielsen), jabon (Anthocephalus cadamba (Roxb.) Miq), and acacia (Acacia mangium Willd.)

Abstract

ABSTRACTSengon, jabon, and acacia are fast-growing tropical wood species that are important for several wood industries in Indonesia. The purpose of this research was to evaluate the surface roughness and wettability of some heat-treated, fast-growing Indonesian wood species. Surface roughness was evaluated using the mean arithmetic deviation of the profile (Ra), whereas wettability was determined by measuring the contact angle method. The wood was subjected to heat treatment at 120, 150, or 180°C for 2 or 6 h using a small kiln unit. The heat treatment modification reduced the moisture content, wood density, and surface roughness and increased the wettability properties of all wood species. Jabon wood was the smoothest, followed by acacia and sengon, whereas jabon had the lowest wettability, followed by acacia and sengon. Wood anatomy has influences on those properties tested. Heat treatment did not affect surface quality but revealed a significant difference in wettability properties.