Abstract
Prosopis juliflora (PJ) fibre-reinforced polymer composites are fabricated with fly ash and SiC as fillers with different weight percentages. Jute layers are also sandwiched for added strength in the structure. The wear behaviour is found for the prepared composition of samples. Pin-on-disc wear testing apparatus is used for the wear performance along with the design of experiments approach using orthogonal arrays of Taguchi’s. The effect of the input parameters (load, sliding velocity, speed) is studied on wear resistance. The experimental design creates sliding wear evaluations based on Taguchi’s L9 orthogonal array to identify the most dominating factors influencing the wear rate. This study demonstrates that the most important component affecting the sliding wear rate of the composite materials is followed by the sliding velocity, speed, and load. The result of the wear rate decreases with an increase in filler content and also increases with sliding velocity. The samples with fly ash and SiC fillers reportedly seemed to have the best wear rates.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
