Abstract
The influence of a tannin pretreatment applied to slightly rusted steel panels on the anticorrosive performance of alkyd paint systems has been investigated using electrochemical impedance spectroscopy (EIS) and open circuit potential measurements. From EIS and corrosion potential data analysis it was found that (1) there is not a significant influence of the tannin pretreatment on the anticorrosive protection level, which depends particularly on the barrier effect afforded by the applied paint system (however, as the corrosion process starts, tannins may cause the repassivation of steel); (2) the enhancement of the protection level afforded by the tannin primer was restricted to short immersion periods and corrosive media that were not very aggressive; and (3) water uptake was not significantly affected by the presence of the tannin primer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.