Evaluation of soft switching for EV and HEV motor drives

Abstract

Soft switching has the potential of reducing switch stresses and of lowering the switching losses as compared to hard switching. To understand the effectiveness of the soft-switching technique, when applied to electric vehicle (EV) and hybrid electric vehicle (HEV) systems, it may be necessary to first evaluate their system requirements and performance. This evaluation process would require knowledge of the vehicle dynamics. The vehicle load requires a special torque-speed profile from the drivetrain for minimum power ratings to meet the vehicle's operational constraints, such as initial acceleration and gradability. The selection of motor and its control for EV and HEV applications are dictated mainly by this special torque-speed requirement. As a consequence, this requirement will have a strong influence on the converter operation. This paper makes an attempt to evaluate EV and HEV running in both standard Federal Test Procedure 1975 city driving and highway driving cycles. A simplified analysis is carried out for several of the most commonly used electric motors operating on the optimal torque-speed profile. Special attention is given to the converter conduction and switching losses, by analyzing the switching losses, and by assuming that an ideal soft-switching scheme will have zero switching losses, one can evaluate the improvement in the system efficiency if a soft-switching control is used. The relative significance of soft switching for EV and HEV systems is then established.