Evaluation Of Selected Sidewalk Pavement Surfaces For Vibration Experienced By Users Of Manual AndPowered Wheelchairs

Abstract

Background: Obstades such as bumps, curb descents, and uneven driving surfaces cause vibrations that affect the wheelchair, and in turn, the wheelchair user. Chronic exposure can cause low-back pain, disk degeneration, and other harmful effects. Little research has been conducted to assess the vibrations experienced by wheelchair users.Objective: The purpose of this study was to conduct an evaluation of the vibration exposure du ring electric-powered wheelchair driving and mechanical energy requirements for manual wheelchair propulsion over selected sidewalk surfaces. The goal was to determine the criteria for a wheelchair-pedestrian access route that does not require excessive propulsive work or expose wheelchair users to potentially harmful vibrations.Methods: Ten unimpaired individuals participated in this study. Six sidewalk surfaces were tested. Measured variables included power of the acceleration per octave, mechanical work to propel over surfaces, peak acceleration, and frequency at which peak acceleration occurs.Results: For both the manual and electric-powered wheelchair, at 1 m/s, significant differences were found in peak accelerations between the seat and footrest (P < 0.0001) and between the sidewalk surfaces (P = 0.004 ). The greatest risk for injury caused by shock and vibration exposure occurs at frequ encies near the natural frequency of seated humans (4-15 Hz). The values for work required to propel over the surfaces tested were not stat istically significantly different. Besides appearance and construction, the only distinguishing characteristic was surface roughness caused by the joints.Conclusion: When treating the poured concrete sidewalk as the standard, surfaces 2, 3, 5, and 6 compared most favorably in t erms of vibration exposure, whereas surface 4 produced mixed results. Surfaces 2, 3, 5, and 6 yielded results that were similar to the poured concrete sidewalk and could be considered acceptable for wheelchair users. in conclusion, surfaces other than the t raditional poured concrete can be used for pedestrian access routes without adding vibration exposure or reducing propulsion efficiency.