Abstract
Based on data provided from an industrial plant and FactSage commercial software use, a study of secondary refining slags and inclusion cleanliness was performed. Six heats of two slag series, namely, A and B, with average chemical composition (wt pct) of 43.00CaO-25.90SiO2-12.96Al2O3-18.13MgO for series A and 49.98CaO-23.88SiO2-10.11Al2O3-11.99MgO-4.03CaF2 for series B, were used for the study. Both series used DIN 38MnS6 modified steel. The effective viscosity, solid fraction, composition of the liquid fraction, and slag saturation degree in MgO (calculated through thermodynamic software) were related to the experimental results obtained for the inclusion cleanliness. The B slags showed lower effective viscosity than the A slags, due to their high liquid fraction. Regarding the capacity of slags in the inclusion removal, slag B5 resulted in the lowest inclusion density and was considered as the best choice among the slags studied. The inclusion species formed using B slags are constituted especially of CaO-Al2O3-SiO2 and MgO-Al2O3 and are Al2O3 rich. The presence of sulfide-type inclusions (AlMnS and CaS) were more pronounced among A slags.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
