Abstract
This paper evaluates the performance of different roofing sheet systems for different roof types using four different codes namely MS 1553, EC1-1-4, IS 875 and BS 6399. The maximum roof pressures using different codes (MS 1553, EC1-1-4, IS 875 and BS 6399) on critical and general area of the different roof types considering buildings with non-dominant opening, dominant opening and canopies have been evaluated. The maximum recommended wind speed in MS 1553 namely 33.5 m/s has been used as the reference for the numerical comparison. The major differences in the codes include averaging time for wind speed, terrain, reference height, and pressure coefficients. The study examines the conservativeness or not of the codes if used in the Malaysian context, even though they have been developed for a different wind climate and region. Further, the results of static test on different steel roofing sheets used in Malaysia using AS 1562.1 available as the limit state wind pressure capacities in the technical brochures are compared with design wind pressures for critical and interior regions of the roof for different wind zones. The suitability of a particular roofing sheet system for a particular wind zone is then assessed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.