Abstract
This study provides a detailed investigation on the reproducibility of two groups of alkali-activated slag (AAS) mixtures, from both fresh properties and strength development perspectives. Three different commercial sodium silicate solutions and one lab-produced silicate activator (made of silica fume and sodium hydroxide) were used to prepare AAS pastes with the same nominal composition in each group. The reaction process of each AAS mixture was monitored by calorimetry and ultrasonic pulse velocity (UPV) measurements. Meanwhile, mini-slump and flow curve tests measured by rheometer were conducted in the first hour to characterize the evolution of fresh properties. The compressive and flexural strength of hardened AAS mortars were measured at different curing ages. The results revealed that AAS pastes prepared with three different sodium silicate solutions exhibited almost identical reaction kinetics, as well as the evolution of fresh properties and strength development. However, the reaction took place rather fast in AAS pastes made of silica fume. These mixtures showed worse rheology and less strength than the corresponding mixtures prepared with sodium silicate solutions. Furthermore, the present study also showed the feasibility of making the same AAS paste through different class commercial sodium silicate solutions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
