Evaluation of Resin Penetration Depth in Enamel Surface for Orthodontic Bonding Exposed to Five Types of Enamel Conditioning Methods: A Scanning Electron Microscopic Study.

Abstract

Aims and Objectives:To evaluate the enamel surface depth of resin penetration for orthodontic bonding when exposed to five types of enamel conditioning methods using scanning electron microscope.Materials and Methods:The sample comprised of 25 human extracted premolar teeth for orthodontic reasons. The samples are divided into 5 groups with each 5 teeth based on the enamel conditioning methods such as group A with 37% Phosphoric acid, group B with 10% Polyacrylic acid, group C with Self etch primer, group D with Laser etching and group E with air abrasion etching. All the samples in each group are bonded with metal brackets using Transbond XT Adhesive. After bonding, the teeth are sectioned mesiodistally using hard-tissue microtome and observed under scanning electron microscope at 500x and 3000x for the calculation of depth of resin penetration.Results:The teeth etched with 37%phosphoric acid exhibited significantly greater depth of resin penetration (15.1µm) than do self-etch and polyacrylic acid. Laser etching has comparable penetration depth with that of acid etching. Air abrasion has got the least penetration of all groups.Conclusion:Comparing the enamel treated with these conditioning methods, the penetration of resin material into enamel are greater when it is treated with 37% Phosphoric acid than self-etch or laser etching.