Abstract
This study aimed to evaluate reaction conditions for deposition of SiO2 nanoparticles on the surface of cellulose fibers and their influence on moisture adsorption of the hybrid organic–inorganic material formed. SiO2 nanoparticle deposition was carried out with the sol–gel process testing four reaction times (2, 12, 18, and 24h) and three contents of the tetraethyl-orthosilicate (TEOS) precursor (1.9, 4.2 and 8.4gg−1 of cellulose fiber). Modification time and TEOS content directly influence the amount of Si deposited on the fiber surface, nanoparticle diameter distribution, thermal stability, and resistance to moisture adsorption. There is a tendency of slight increase of nanoparticle size and the amount of Si deposited with increasing reaction time. SiO2 nanoparticles were bonded on the surface of the cellulose fibers and are able to improve thermal stability of the material, increasing onset degradation temperature. The moisture adsorption capacity of the modified cellulose fiber was reduced up to 50%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
