Abstract
Proton exchange membranes (PEM), which have been commonly used in fuel cells have raised interest for the application in harsh environments involving ionizing radiation. Therefore, radiation stability and ability to sustain their functionality under the radiation environment are of great interest. Within this study, electron beam irradiation in dose range from 50 to 500kGy was used to evaluate the effects of radiation on the physico-chemical and mechanical properties of two types of PEM: commercial Nafion®117 and sulfonated poly(ether-ether-ketone) (SPEEK) with high degree of sulfonation (DS = 0.75±0.5).SPEEK membrane presented higher mechanical and thermal stability compared to that of Nafion® at doses up to 250 kGy, which was evidenced by infrared and electron paramagnetic resonance spectroscopy, thermal analysis, ion chromatography methods. Tensile tests at room temperature and dynamical mechanical analysis of irradiated membranes revealed improved strength, storage modulus at room and elevated temperatures (80°C) for irradiated SPEEK as compared to pristine PEM. For comparison Nafion® exhibited notable deterioration of mechanical properties including elongation at break due to the predominant oxidation and chain scission already at doses exceeding 50 kGy. The study indicated that SPEEK could be perspective replacement of traditional PEM for application in fuel cells exposed to ionising radiation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.