Abstract
The oil production flow rate of the EYP-211 well is relatively small, only 12.75 BOPD. The small fluid flow rate is caused by the small formation permeability which is only 2.1 mD. Currently the EYP-211 well has been stimulated with Propellant/Stimgun, but not all of the formation layers can be carried out by Stimgun work so that it is necessary to evaluate it with Geomechanical analysis to determine the success of the stimulation work by calculating the Poisson's ratio and Young's modulus which will be analyzed based on well-logging data.Based on the results of the brittleness index and fracability index analysis, the EYP-211 well is recommended to be stimulated at a depth of 632.92 m to 635.46 m. Stimgun work on the EYP-211 well resulted in a fracture with an average fracture width of 0.02035 in, a fracture height of 9.81 ft and a fracture length of 481.09 ft. The formation permeability increased from 2.1 mD to 14.07 mD due to fractures produced by the stimulus. The flow rate of oil production in the EYP-211 well increased from 12.75 bopd to 140 bopd due to the increased permeability generated by the fracture.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
