Evaluation of Productivity and Cost Analysis on a Combined Logging System

Abstract

The efficient planning and control of timber harvesting operations is crucial to growth productivity and reducing costs, and different systems or methods are applied to obtain elevated performance. In particular, cable yarding is a highly appreciated and very efficient wood extraction method in areas that are difficult to access with ground-based extraction machines. Combined logging systems are not diffuse and not often implemented. For this reason, the use and the application of innovative methods are limited. However, some combinations have recently been observed in forest operations. This study, conducted in a deciduous stand in Bulgaria, paid attention to the combination of a tractor-mounted tower yarder (Valentini V400) with a clambunk skidder (Timberjack 1010D), aiming to examine the viability and develop the operational efficiency of the two-stage extraction system and to define the time, log volume extracted per unit by the yarder and the clambunk, and the yarding and skidding costs. The researchers carried out a time-motion study and performed a regression analysis to identify those variables that are most likely to affect the duration of work elements and productivity. For cost analysis, the COST model was used. The mean productivity of the tower yarder was 10.34 m3/PMH and 8.11 m3/SMH, while for the clambunk skidder, the productivity was 6.23 m3/PMH and 4.93 m3/SMH. The net costs for the combined logging system were calculated as 120.87 €/PMH and 14.93 €/m3. This study adds new data about the correct use of both machines, supporting their application in beech forests.