Evaluation of physical properties of fiber-reinforced composite resin

Abstract

ObjectivesThis study aimed to investigate physical properties of a fiber-reinforced CAD/CAM resin disc, which included woven layers of multi-directional glass fibers. MethodsFiber orientations of CAD/CAM specimens (TRINIA, SHOFU) were specified as longitudinal (L), longitudinal-rotated (LR), and anti-longitudinal (AL). A fiber-reinforced composite (everX posterior, GC (E)) and a conventional composite (Beauti core flow paste, SHOFU (B)) were also tested.A three-point bending test and a tensile test with notchless prism-shaped specimens were conducted using a universal testing machine (AUTOGRAPH AG-IS, Shimadzu). A water absorption test was also carried out after the specimens were stored in water for 24h or 1 week. Flexural strength and fracture toughness were obtained by conducting a three-point bending test. ResultsTRINIA L and LR groups showed significantly high flexural strength (254.2±22.3 and 248.8±16.7MPa, respectively). Those were approximately 2.5 times higher than those in AL, E, and B groups (96.8–98.0MPa) (p<0.05, ANOVA and Tukey HSD test). No significant difference was shown in flexural modulus among the experimental groups. The fracture toughness in L group (9.1±0.4MPa/m1/2) was found to be significantly higher than those in other groups (1.9–3.0MPa/m1/2; p<0.05). TRINIA group demonstrated significantly lower water absorption (4.7±1.9μg/mm3) than did E (16.1±3.1μg/mm3) and B (17.3±3.7μg/mm3) groups (p<0.05). SignificanceTRINIA demonstrated distinct anisotropy. TRINIA can be used as a superior restorative material when specifying directions of its fiber mesh layers.