Abstract
This study assesses two parameters that can result in high efficiency in the recovery of the microalgae Monoraphidium contortum. The significant contribution of this paper is to test different coagulants in different conditions of concentration in the coagulation and flocculation processes followed by sedimentation to evidence the best coagulant and the best condition for harvesting of Monoraphidium contortum biomass. So the proposed methodology aimed to perform preliminary tests using a tannin-based cationic coagulant (TANFLOC SG®), FeCl2, and Al2 (SO4)3, where they were performed at concentrations of 0, 20, 40, 60, 80, and 100 mg L−1 at a fast mixing speed of 400 RPM. The tests determined 20 mg L−1 of Tanfloc SG® as the most efficient turbidity reduction in the preliminary test. The obtained results were used to construct a non-factorial central composite planning. Therefore, after a design of experiments, the study outcome shows the best turbidity removal range from the main tests came at 35 mg L−1 and 550 RPM of fast mixing speed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
