Abstract

ABSTRACT In-vessel retention (IVR) of a molten core through external cooling of the reactor vessel is a severe accident management strategy at nuclear power plants. The enhancement of critical heat flux (CHF) is one of the measures to improve the success probability of IVR. A nanofluid, in which nanoparticles are dispersed in a liquid, is known to reliably enhance CHF, mainly under pool boiling conditions. However, to apply nanofluids to IVR, it is necessary to clarify the effect of CHF enhancement under convection boiling similar to that in an actual IVR event. Therefore, CHF tests were conducted using a rectangular test section 50 mm wide × 50 mm deep × 600 mm long under conditions simulating severe accidents. From the CHF data obtained for various nanofluid parameters under typical severe accident conditions, each parameter’s effect on CHF enhancement was clarified. It was found that CHF was improved by 50% or more by a nanofluid as compared with deionized water. Furthermore, the CHF of nanofluid obtained in the tests simulating the actual severe accident conditions increased from 30% to 50% compared with that of deionized water, suggesting that CHF can be enhanced by nanofluids even in an actual plant.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.