Evaluation of modified turbulent viscosity on shedding dynamic of three-phase cloud cavitation around hydrofoil – numerical/experimental analysis

Abstract

PurposeThis paper aims to focus on the cavitating flow around the Clark-Y hydrofoil when the dissolved air is taken into account as the third phase. As the RNG k-epsilon model yields poor prediction due to overestimation of viscosity, the modification approaches including density corrected method, filter-based model and filter-based density correction model are used, and the turbulence model is modified. Also, the numerical results are compared with the experimental data.Design/methodology/approachThe cavitating flow is known as a complex multi-phase flow and appeared in the regions where the local pressure drops under saturation vapor pressure. Many researches have been conducted to analyze this phenomenon because of its significant impact on the erosion, vibration, noise, efficiency of turbomachines, etc.FindingsThe experiments are conducted in a rectangular test section equipped with Clark-Y hydrofoil providing cavity visualization, instantaneous pressure and vibration fluctuations. The simulations are carried out for different cavitation numbers with and without dissolved air. The Fast Fourier Transform, continues wavelet transform and temporal-spatial distribution of gray level are implemented to extract and compare the shedding frequency of experiments and numerical predictions and cavitation evolution. It is concluded that the flow structure, shedding frequency and time-averaged characteristics are highly influenced by the dissolved air. Also, the numerical prediction will be more satisfactory when the modified turbulence models are applied.Originality/valueTo the best of the authors’ knowledge, the originality of this study is the modification of the turbulence model for better prediction of cavitating flow, and the validation of numerical results with corresponding experimental data.