Abstract
ABSTRACTThermoelectric composite alloys consisting of the β-FeSi2 matrix and SiO2 particles dispersion were fabricated by a so-called combined reactions sintering process using reduction and oxidation reactions between eutectoid Si decomposed from α-Fe2Si5 and added Fe-oxide powder. Typical microstructure may include some of residual eutectoid Si particles, intermediate product Fe2SiO4 particles, and/or remaining reduced Fe particles depending on the composite alloy compositions and the process conditions. Partitioning of doping element, n-type Co or p-type Mn, during the process plays an important role to control the optimum carrier concentration of the composite alloys. Thermal conductivity can be reduced, as expected, by the dispersion of SiO2 particles. The solubility of doping elements, Co, Mn, Al, and Ru was evaluated in α-Fe2Si5 at 1373 K and in β-FeSi2 at 1073 K being based on the isotherm determination. It is suggested that suitable dopants for the present process are n-type Co and p-type Mn, since they have sufficiently large solubility around 10 at% in both α-Fe2Si5 and β-FeSi2 phases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
