Abstract
BackgroundUniversal bondings can be used either with the etch-and-rinse or self-etch technique. Thus, the present study was done to evaluate the micro-shear bonding strength of two types of Universal Bondings to superficial dentin i.e self-etch and etch and rinse.Material and MethodsThe samples included 70 tooth blocks taken from 35 extracted sound premolar teeth. The superficial dentin was exposed to grinding by 800 grit silicon carbide Disk. The samples were randomly divided into 5 equal groups (14 samples in each group). Scotch bond universal (3M/USA) and All bond universal (BISCO/USA) were applied by self-etch and etch and rinse technique in group 1-4 and Adper Single bond 2 (3M/USA) was used in group 5 as etch and rinse for the control group. Z250 XT (3M/USA) resin composite was bonded in tygon tube on surfaces of samples and were cured. Specimens were stored in distilled water at 37ºC for 24 h and then subjected to the micro shear bond strength test in a universal testing machine at a crosshead speed of 0.5 mm/min. The data were analyzed by two-way ANOVA and Tukey test. Failure mode was determined using a stereomicroscope under 20X magnification. Significance level was considered 0/05.ResultsThe mean of micro-shear bonding strength and Standard Deviation of groups in Mega Pascal are respectively: 35.74 (6.21), 29.50 (3.89), 24.60 (3.53), 31.47 (4.73), 18.09 (3.87). The self-etch technique for Scotch bond Universal and the etch and rinse technique for All bond Universal showed higher micro shear bonding strength. Adper single bond 2 showed the lowest bond strength to a significant level in comparison to other groups (p<0.05). Failure mode was predominantly adhesive.ConclusionsThe micro shear bonding strength of universal adhesives was highly bonding-dependent. Universal bondings had higher micro-shear bonding strength than Adper single bond 2. Key words:Bond strength, dentin, self-etch, etch-and-rinse, universal bonding.
Highlights
Nowadays, patients’ desire to have beautiful teeth and using tooth-colored restorations has increased, so that composites are used to repair both anterior and posterior teeth
The following null hypotheses were tested in this study: (1) there would be no significant difference between The microshear bonding strength of the two types of universal bonding with each other and the control group; (2) there would be no significant difference in microshear bonding strength of scotch bond universal in self or total etch Techniques
This study showed that there is a difference between the investigated groups in terms of micro shear bond strength
Summary
Patients’ desire to have beautiful teeth and using tooth-colored restorations has increased, so that composites are used to repair both anterior and posterior teeth. They have low bond strength to the enamel .Over the recent years, new types of bondings have been produced, and given their application method and junction strategy, they are named universal or multipurpose (multi-mode ) They can act as both self-etch and total-etch, and have the capability to create appropriate bonding with wet or dry dentin. According to contraindications found in other studies, the aim of this study was to evaluate the micro shear bond strength of two types of universal bonding agents to superficial dentin surface with two self-etch and total etch strategies. The present study was done to evaluate the micro-shear bonding strength of two types of Universal Bondings to superficial dentin i.e self-etch and etch and rinse. Universal bondings had higher micro-shear bonding strength than Adper single bond 2
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
