Abstract
Now-a-days traditional materials are replacing the natural fibres in automobile components like dashboards, seat-backs and interior trims due to its properties like light weight, environment friendly, good stiffness and high strength to weight ratio . In the study three different continuous fibres, Acacia, Jute and Sisal were mixed in varying proportion with GFRP and epoxy resin on a determined ratio basis to get three different composite samples. These fibres were alkaline treated and moulded using compression moulding and hand lay-up technique. These samples were tested for their Tensile and Impact strengths to find the specimen with higher strength. Scanning Electron Microscope (SEM) test was also conducted to study the structure of all three specimens after tensile test. The study concludes that the sample ‘A’ which has maximum content of sisal has higher tensile strength than other two samples. Similarly impact test concludes that specimen ‘B’ and ‘C’ which has maximum content of Jute and Acacia has equal and higher strength.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.