Abstract
This research work developed a method for the analysis of epoxy matrix nanocomposites used in epoxy resin with the incorporation of Al2O3 and SiO2 nanoparticles. The different tests were performed in order to derive the mechanical characteristics and wear properties of Al2O3 and SiO2 nanoparticles. The mixing is performed using an ultrasound process where the nanoparticles are mixed with the resin for a homogeneous diffusion. The strengths observed for the nanocomposite were higher for bending and impact strength because of the Al2O3 and SiO2 nanoparticle incorporation. The wear rate and friction coefficient is observed to be reduced due to the incorporation of Al2O3 and SiO2 nanoparticles into the epoxy resin. This characteristic has a significant benefit of using Al2O3 and SiO2 nanoparticles for loading conditions. The effects of Al2O3 and SiO2 nanoparticles were more effective in epoxy resin, which were more effectively been derived by reinforcing methods.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.