Abstract
The effect of Nd:YAG laser surface modification on the microtopography and physicochemical properties of Ti–6Al–4V alloy has been investigated with a view of biomedical applications. The surface roughness and hardness of laser treated samples at 140 J cm−2 were found to be 7±0·02 and 825 VHN respectively. The superior microhardness value can be attributed to grain refinement associated with laser melting and rapid solidification. The electrochemical property, mainly pitting corrosion resistance, has been carried out in Hank’s salt balanced physiological solution using standard potentiodynamic polarisation testing. A higher corrosion potential of −0·21 V was achieved for laser treated samples. At the optimum of laser fluence (140 J cm−2), energy dispersive X-ray analysis showed about a 30% decrease in vanadium content. Contact angle measurements also indicated improved surface wettability (i.e. hydrophilicity) characteristics at 35°. Finally, cell culture studies provided a useful tool to investigate the morphology and cell cytotoxicity of the laser treated surfaces.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
