Evaluation of low cost immobilized support matrices in augmentation of biohydrogen potential in dark fermentation process using B. licheniformis AP1

Abstract

In this study, the impact of immobilized (cell adsorbed and cell entrapped) matrices or beads on biohydrogen production potential has been reported. The novelty of this research is to investigate the impact of natural waste matrices or carriers (coconut coir-CC, wood shaving-WS) and low cost carriers (foam-FM, and alginate) on biohydrogen production potential. The study for dark fermentation process was performed for 2 days with four batch tests using cell adsorption method and six batch tests using cell entrapment method at initial pH (6.5), and temperature 38 ± 2 °C temperature. Cell adsorbed solid matrices reported maximum biohydrogen potential results as 62 ± 5.6 mL H2/30 mL (control), 138 mL ± 7 mL H2/30 mL (foam), 103.75 ± 6.7 mL H2/30 mL (coconut coir), and 96 ± 6.36 mL H2/30 mL (wood shaving). In cell entrapment, alginate supplemented TiO2-NP reported results as 32 mL ± 2.8/30 mL (control- 0 TiO2 mg/L), 35 ± 2.4 mL/30 mL (200 TiO2 mg/L), 40 ± 2.8 mL/30 mL (400 TiO2 mg/L), 53 ± 4 mL/30 mL (600 TiO2 mg/L), 75 ± 4.2 mL/30 mL (800 TiO2 mg/L), and 93 ± 3 mL/30 mL (1000 TiO2 mg/L) respectively. The SEM observation displayed that foam was the best carrier for high cell adhesion on its surface in comparison to other carriers due to surface characteristics. The current study achieved maximum yield 2.07 mol/mol of glucose using foam carrier. Majorly, acetic acid followed by butyric acid is analyzed as by-products at the end of dark fermentation.