Abstract
Cast lead-calcium alloys have been generally employed in valve-regulated lead/acid (VRLA)_batteries since they appeared in the early 1970s. Some minor elements such as aluminium, silver, bismuth and some alkaline earth metals are also added to lead-calcium alloys to improve the alloy properties and the battery performance. A convenient method for the addition of aluminium into the alloy, compared with other methods reported, is presented. On addition to lead—calcium alloys,bismuth can form a BiCa compound according to the de-bismuthizing equation: 3Pb 3Ca+2Bi→Bi 2Ca 3+9Pb. There is a slight solubility of Bi 2Ca 3 in the lead at its melting point (327°C) with an amount of 0.048 wt.% resident bismuth. It is confirmed that the creep strength and the corrosion resistance is distinctly increased by the addition of silver into the grid alloy, but the associated gassing problem should be considered when such alloys are employed in VRLA batteries. Addition of sodium can refine grain sizes and increase the mechanical properties of the grid alloy, but the corrosion resistance of sodium-contained grids is inferior. A general description of experiments and application of tin, aluminium, bismuth, silver and sodium as additives in lead—calcium alloys is given.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
