Abstract
The application of La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) as a potential cathode working on a BaCe0.54Zr0.36Y0.1O2.95 (BCZY) electrolyte for proton conducting solid oxide fuel cell was investigated. LSCF nanoceramic powders were synthesized by an activated carbon-assisted sol-gel process using metal nitrate-based chemicals. The LSCF powder was transformed to a slurry and spin-coated onto both surfaces of BCZY pellet to form a symmetrical cell with the configuration of LSCF|BCZY|LSCF. The symmetrical cell was subsequently sintered at 950°C for 2 h to allow a good contact formation between electrode/ electrolyte layers. The phase structural verification of the calcined powders was investigated by X-Ray diffractometer (XRD). Field-emission scanning electron microscopy (FESEM) was employed to examine the morphology of the sintered cell. The electrochemical behaviour of the symmetrical cell was studied by an electrochemical impedance spectroscopy. The formation of a single perovskite LSCF phase with a crystallite size of 20 nm was obtained at 700°C as corroborated by XRD analysis. The FESEM images showed a good contact between LSCF cathode and BCZY electrolyte at electrode/ electrolyte interfacial layer. The ASR obtained for LSCF symmetrical cell measured at 700°C with and without Pt current collector is 0.87 and 31.25 Ωcm2, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
